curriculum vitae

 

Momcilo m. stevanovic

Naučni savetnik – redovni profesor

 

Osnovni podaci

Organizacija: INN Vinča, Laboratorija za materijale

Broj tel/fax: +381 11 2439 454

e-mail:stem@vin.bg.ac.yu         stem@sezampro.yu

 

LIČNI PODACI

Rođen:1935, Skoplje

Bračno stanje: dvoje dece

 

obrazovanje

Osnovne studije: Univerzitet u Beograd, Tehnološki Fakultet - 1959

Specijalizacija: CEN Saclay, Pariz, Radijaciono oštećenje sinterovanih oksida-1962.- 1964,

Doktorat: Tehnološki Fakultet, Beograd, Radijaciono oštećenje vatrostalnih oksida - 1965

Posle-doktorske studije: ABAE, Studsvik, Švedska, Ponašanje nuklearnog goviva u reaktou  –1966/67

 

PRETHODNE ISTRAŽIVAČKE OBLASTI

Nauka o materijalima-keramički materijali - radiaciono oštećenje i fenomeni

i procesi transporta mase u sinterovanim oksidima

Hemijska termodinamika, heterogena ravnoteža – nestehiometrija i ravnoteže

para-tečnost i čvtsto-para. Termodinamika isparavanja.

Nauka o materijalima – mehaničko ponašanje kompozita vlakna/plastika.

Testiranja standardnim metodama vlakana, matrice i komposita. Korelasanje strukture

i osobina. Nelinearno elastično ponašanje karbonskih vlakana i komposita

ojačanih ovim vlaknima. Size efekat u unidirekcionim kompozitima i ivični efekti u laminatima.

 

AKTUELNA OBLAST ISTRAŽIVANJA

Nauka o materijalima - mehaničko ponašanje kompozita kontinualna

vlakna/polimerna matrica: Uticaj ambijentnih uslova (apsorbovan voda,

temperatura, gama zračenje). Mehanika loma delaminacije (Mode I and II).

 

PROFESIONALNA DELATNOST

 

I. Istraživanja

                        Rukovodilac 8 potprojekata (trajanja  jedna do dve godine) I 4 projekta (trajanja  tri do pet godina) , kao naučni saradnik (1966-1975) viši naučni saradnik i naučni savetnik as scientific senior associate (1976-1980) and as scientific counselor (1986-2000).

                        Rukovodilac je projekta Novi karbonski materijali i kompoziti ojačani karbonskim vlaknima-P 1977  koji finansira MNTR Srbije  (2002-2004.)

 

 

 

II. Univerzitetska nastava

Electronski fakultet Univerziteta u NIsu  – 1969-1974

1.      “Opšta hemija”, redovne studije

2.      “Nauka o materijalima”, poslediplomske studije

Tehnološki fakultet, Univerziteta u Novom Sadu, 1975-1980.

3.      “Hemijska termodinamika”, redovne studije

Tehnološko metalurški fakultet, Univerziteta u Beogradu, 1996-2000.

4.      “Heterogena ravnoteža”, redovne studije

5.      “Testing of Composite Materials”, poslediplomske studije

Centar fza uutidiscplinarne studij, Univerziteta u Beogradu, od 1982.

6.      “Kompoziti materijali”, poslediplomske studije,

 

 

III. Prateće rofesionalne aktivnosti

 

Rukovođenje i upravljanje

 

            Institute Vinca

1.      Član Naušnog veća Instituta 1968-1071.

2.      Član Izvršnog odboraInstituta 1968-1071.

3.      Šef Odeljenja za Keramiku Laboratorije za materijale 1971-1973

4.      Našelnik Laboratorije za materijale 1974-1975.

5.      Pomoćnik direktora Instituta  1986-1990.

6.      Potpredsednik Upravnog odbora Instituta  1992-1996.

 

Univerzet

1.      Predsednik Saveta Instituta za naftu, gas, petrohemiju i hemijsko inžinjerstvo Tehnološkog fakulteta u Novom Sadu 1976-1978.

2.      Član Naučnog veća Beogradskog univerziteta 1988-1990.

 

Članstvo u naučnim društvima  i udruženjima

 

      Nacionalna društva

  1. Predsednik Komisije za keramiku  Unije Hemijskih društava Jugoslavije, Beograd 1975-1978
  2. Član Pretsedništva Jugoslovenskog društva za karbonske i kompozitne materijale, Beograd, od 1995.
  3. Član Pretsedništva Jugoslovenskog društva za istraživanja materijala , Beograd, od 1999.

 

Međunarodna durštva i udruženja

  1. Član Medjunarodne zajednice za inženjerstvo kompozita, ICCI, New Orleans, USA, od 1994.
  2. Član Evropskog društva za kompozitne materiale, London, od 1998.

 

 

 

Članstvo u redakcionim odborima

 

  1. Član naučnog odbora (Odbora za selektiranje radova) Evropskih Konferencija Composite Testing and Standardisation – CTS, (od 1992)
  2. Član redakcionog odbora časopisa Tehnika – Novi Materijali, Beograd,
  3. Član predsedništva i redakcionog odbora konferencija Jugoslenskog društva za istraživanje materijala (od 1995.), recenzirao više radova podnetih za publikovanje u časopisu Materials Science Forum.

 

Međunarodna saradnja

 

Prethodna saradnja

 

  1. VISA Projekat –CEN Saclay (Francuska) –Institut Vinča, period 1962 – 1967. (oblast Radijaciono oštećenje nefisibinih oksida)
  2. Institut problem materialovedenya (Kiev, Ukraina) –Odeljenje za keramiku Laboratorije za materijale Vinča Instituta, period 1969 – 1975. (Oblast  Mechanizmi tansporta mase iu sinterovanim oksidima)
  3. Prof.E.Fitzer , Institut fur Chemishe Technik, Univerzitet u Karsrueu – Odeljenje za karbon Laboratorije za materijale Vinča Instituta, period 1980-1989.(Field of Testing of Composite Materials)

 

Aktualna saradnja istraživačkog tima M Stevanovića

 

()

  1. sa Prof. P.J.Hogg, šefom Materials Department, Queen Mary University (London) Oblast: Mehaničko ponašanje vlaknima ojačanih komopzita (neoficijena saradnja od 1989)
  2. sa AkademikomJ.G.Tarnopolskim, šefom Laboratory of Composite Structures, Institute of Polymer Mechanics (Riga- Latvia) Oblast: Mehaničko ponašanje vlaknima ojačanih komopzita (neoficijena saradnja od 1994)
  1. sa Prof. C.Galiotis, Institute of Chemical Engineering and High Temperature Processes, Patras, Greece Oblast: Mehaničko ponašanje vlaknima ojačanih komopzita (oficijena saradnja od s 2004))

 

Przinanja

 

            Plaketa Institutza  nuklearne nauke Vinča povodom pedeste godišnjice osnivanja Instituta (1998.)

 

 

 

 

 

 

 

 

 

 

 

 

SPISAK RADOVA

 

MEĐUNARODNI ČASOPISI

1.      Stevanović M., Petrović V.
»Contribution  to the Effect of Gas Pressure in the Pore on Boundary Migration and Grain
Growth in Sintered UO2«,

Pov.Met.Inter., 2 (1970) 49-56.

2.      Stevanović M.
»Influence of Pore Shape and Gas Pressure in Pore on Grain Boundary Migration«,
Phys.Sinter., 2 (1970) 49-56.

3.      Katanić-Popović J, Stevanović M
»Torsion Strength of Sintered UO2«,

 Epitoanyag, 24 (1972) 392-397.

4.      Stevanović M
»Volume Change of Pore Interacting with Grain Boundary«,

Phys.Sinter., 5 (1973) 25-30.

5.      Bošković S, Stevanović M
»Sintering of Co Dopped NiO«,

J.Mat.Sci., 5 (1975) 25-29.

 

6.      Stevanović M, Štiglić R
»ForceThermoelectrique et Pouvoir Thermoelectrique de NiO«,

Rev.Inter.Htes.Temp.Refract., 12 (1975) 93-96.

7.      Bošković S., Malčić S, Stevanović M
»Preparation, Properties and Reactions (CoyNi1-y)1-xO-Oxygen«,

J.Brit.Ceram.Soc., 75 (1976) 107-112.

8.      Živanović B, Stevanović M, Ranogajec J
»Analyse Thermodynamique de la Formation de Mulite Secondaire dans les Zones Vitreuse de
Feldspathe Potasique«

Industrie Ceramique, 766 (1982) 820-822.

9.      Stevanović M
»Thermodynamic Characteristics of Vaporization of Alkali Metals«,
Inter.J.Thermophys., 3 (1982) 157-164.

10.  Stevanović M, Đuričić L, Petrović V
»Influence of Oxygen on Grain Growth in Sintered NiO«,

Sci.Sinter., 14 (1982) 53-56.

11.  Stevanović MM
»Evaluation of P-V-T-Composition Characteristics of Carbon Saturated Vapor«,
Inter. J.Thermophys, 4 (1983) 127-138.

12.  Stevanović MM
»Thermodynamic Characterization of Vaporization of Fourth Group Elements«
Inter. J.Thermophys, 4 (1983) 353-362.

13.  Stevanović MM, Jovanović SC, Mihajlov AN
»Contribution a l Etude de la Thermodynamique de Vaporisation de Carbon«,
High Temp. High Press., 16 (1984) 221-228.

 

14.  Stevanović MM
»Evaluation of Temperature Dependence of Vapor Pressure for Silicon
ang Germanium«,

Thermochimica Acta, 77 (1984) 167-176.

15.  Stevanović M, Nešić O
»Characteristiques en Compression et Defaillance Due a la Compresion des Composites
Carbon/Epoxyde«,

      Annales des Composites, 7 (1987) 123-139

16.  Stecenko TB, Stevanović MM
»Variation of Elastic Moduli with Strain in Carbon/Epoxy Laminates,«,

J.Compos.Mat., 24 (1990) 1152-1158.

 

17.  Stevanović MM, Stecenko TB
»Behaviour of Carbon/Plastic Composites Under Uniaxial Load«
Mechan.Comp.Mat., 5 (1991) 924-927.

 

18.  Stevanović MM, Stecenko TB
»Mechanical Behaviour of Carbon and Glass Hybrid Fibre Reinforced Poliester Composites«,
J.Mat.Sci., 27 (1992) 941-946.

19.  Stevanović MM, Stecenko TB
»Tensile and Flexural Macromechanical Characteristics of Glass/Polyester Composites«,
J.Serb.Chem.Soc., 57 (1992) 451-459.

20.  Stevanović MM, Stecenko TB
»The Strain Dependence of the Flexural Modulus in Unidirectional
Carbon/Epoxy Composites«, J.Serb.Chem.Soc., 57 (1992) 785-793.

21.  Stevanović MM
»Analysis of the Effects Influencing the Value of Apparent Flexural
Modulus of Carbon/Epoxy Laminate«, Review paper,

Sci.Sinter., 26 (1994) 195-203.

22.  Stevanović MM
»Simultaneous Determination of Axial and Shear Elastic Moduli of
Unidirectional Carbon/Epoxy Composites«,

 J.Serb.Chem.Soc., 59 (1994) 511-518.

23.  Stevanović MM
»Non-Linear Elastic Behavior of Carbon, Fiber Based Composites«,
J.Serb.Chem.Soc., 60 (1995) 945-950.

24.  Stevanović MM
»Interlaminar Stresses in Flexured Laminate Systems«
Sci.Sinter., 28 (1996) 43-45.

25.  Stevanović MM
»Mechanical Behaviour of Carbon/Epoxy Composites«, Review Paper,
Mat.Sci.Forum, 214 (1996) 231-238.

 

26.  Stevanović MM
»Strength of  Continuous Fibres Reinforced Composites«
Mat.Sci.Forum, 282-283 (1998) 251-257.

27.  Stevanović MM, Marković DS
»Effect of Edge Induced Interlaminar Stresses on Fibre Laminate Strength«,
Sci.Sinter., 31 (1), (1999)  51-59.

 

28.  Stevanović MM, Pešikan DR,
»Tensile Characteristics of Carbon Fibres«
Mat.Sci.Forum, 352 (2000) 183-188.

 

29.  Stecenko TB, Stevanović MM
»The Effect of Fibre Waviness on Compression Failure of Cross-Ply
Carbon/Epoxy Laminates«
Mat.Sci.Forum, 352 (2000) 189-194.

 

30.  Stevanović MM, Elhisnavi AA, Pešikan DR,

»Size Effect inCarbon Fiber/Epoxy Resin Composite«

Mat.Sci.Forum, 413 (2003) 207-212.

 

31.  Stevanovic MM, Pesikan-Sekulić DR

»Macromechanical Characteristics Deduced from Tree Point Flexure

Tests of Unidirectional Carbon/Epoxy Composites«

Mechan.Comp.Mater, 29(6)  (2003) (in press)

 

32.  Stevanović MM, Marković DS, Pešikan DR,

»Effects of Stacking Sequence on Strength of Cross-Ply

and Quasi-Isotropic Carbon/Epoxy Laminates«

Mat.Sci.Forum, (Accepted for publication)

 

 

ZBORNICI RADOVA MEĐUNARODNIH KONFERECIJA

33.  Stevanović M., Elson J.
»Effect of Fast Neutron Irradiation in Sintered Alumina and Magnesia«,
Proc.Brit.Ceram.Soc., 7 (1967) 423-437.

34.  Roux A., Richard M., Eyraud L., Stevanović M., Elson J.
»Determination Direct des Entalphies de Reaction in Phase Solide par une
Methode de Plongee«,

      Inter.Coloque Eff.Irrad., Saclay, Publ CEA, Paris (1967) pp.1-27.

35.  Petrović V, Sigulinski F, Stevanović M
»Grossissement des Grains de l  UO2 de Porosite Differente«,
Proc. 2nd Eur.Symp.Pow.Met., Vol.2, Stuttgart (1968) pp.83.1-25.

36.  Petrović V, Stevanović M
»Phenomenom of Spiral Concentratic Growth in Sintered Materials«,
Proc. 4th Inter.Pow.Met.Conf., Vol.1, Dresden (1969) pp.14. 1-16.

37.  Petrović V, Trbojević L, Stevanović M
»Pore-Grain Boundary Interaction in Sintered UO2,

Proc. 3rd Inter:Conf.Pow.Met., Vol.3, Karlove Vary (1970) pp.325-337.

38.  Kostić E, Stevanović M, Ristić M
»Sinntering in Oxide Materials« (in russian),

Pow.Met.Sum.Scool., Kiev (1970) pp. 1-23.

39.  Anastasijević P,... Stevanović M
»Research in Fuel Element Technology in Yugoslavia«,

Proc. 4th Inter.Conf. Peac.Uses Atom.Energ., Generva 1971,

Publ. IAEA, Vienna 4 (1972) 491-504.

40.  Štiglić R., Trbojević Lj, Stevanović M
»Effect of Li2O Addition on Density and Electrical Conductivity of NiO«,

Proc. First.Conf.Comp.Consol.Partic.Mat., Publ.Pow.Adw.Centre,

London, (1973) pp.75-79.

41.  Bošković S, Stevanović M
»Sinatering of CoO doped NiO«,

Proc.Conf.Ceram.Electr., Libice (1974) 22. pp1-11.

42.  Bošković S, Stevanović M
»Sintering of (CoyNi1-y)1-xO Solid Solution«,

Proc.4th Eur.Symp.Pow.Met., Vol.2, Grenoble (1975) pp.101-109.

43.  Stevanović M, Bošković S
»Investigations of Oxide  Semiconductors«, Review Paper,

Proc. 2nd Yug.Germ.Meet.Mat. Sci. Develop., Bled (1976) pp.114-118.

44.  Bošković S, Stevanović M
»Elektroprovodnost v Izučeni Reakciy i Fazovyh Perehodov do 1000oC v Sisteme
Li2O-CoO-NiO«,

Proc.12th Conf.Silic.Sci.Industr. SILICONF, Budapest (1977) pp.1095-1105.

45.  Stevanović M, Mihajlov-Deduković A., Jovanović S
»Applicability of Different Mixing Rules for Cubic Equation of RK Type in
Description of Binary Sistems VLE«,

Proc. 2nd Yug.Ital.Austr.Chem.Eng.Conf., Bled (1980) pp.1-10.

46.  Stevanović MM
»Mechanical and Failure Behaviour of CFRP Composites«,

Proc.First Germ.Yug.Semin.Carb.Mat., Vinča, Publ.KFA (1985) pp.77-93.

47.  Stevanović MM, Briški DG, Kostić MC
»Shear in Carbon/Epoxy Resin Composites«,

Proc. 4th Inter.Carbon Conf., Carbon 86, Baden-Baden (1986) pp.731-733.

48.  Stevanović M, Kostić M, Stecenko T, Briški D
»Impact Behaviour of CFRP of Different Stacking Geometry«
Proc. 2nd Inter.Conf. Composites Evaluation, Ed. Herriot J.,

Publ.Butterworth, Borough Green (1987) pp.78-83.

49.  Stevanović MM, Stecenko TB, Kostić MC
»Effect of Impactor Shape on Residual Tensile Strength and

Tensile Failure of Carbon/Epoxy Laminates«,

Proc. 5th Int.Conf.Comp.Struct.-Paisly, Elsev.

Appl.Sci.Publ., London (1989) pp.323-331.

50.  Stevanović M, Stecenko T
»Influence of Edge Interlaminar Stresses on Interlaminar Shear Strength of Multidirectional
Carbon Epoxy Composites«,

Proc. Inter.Conf. »Interfacial Phenbomena in Composite Materials«, Ed. I.Verpoest, Butteerworth, Oxford (1991) pp.297-299.

51.  Stevanović M, Stecenko T.
»Contribution to the Proper Interpretation of Data on Carbon/Epoxy Composites in Trhee
Point Flexure test«,

 Proc. Eur.Conf.ECCM-CTS, Amsterdam (1992) pp.197-302.

52.  Stevanović M
»Non-linear Elastic Behavior of Carbon Fiber Based Composites«,

Proc.Inter.Conf. Comp.Eng., New Orleans (1994) pp.1081-1083.

53.  Stevanović MM, Spasojević AD, Marković DS
»Determination of the Shear Properties of Carbon/Epoxy Composites by Different Methods«,
Proc.2nd Eur.Conf. ECCM-CTS (1994), pp.367-376.

54.  Stevanović MM
»State of the Art of Advanced Fibre Reinforced Composites«, Invited Paper,
Proc. SCS.Ceram.Glass Symp. Inter.Particip. - »Advanced Ceramics and Glass-
State and Perspectives
«, Ed. Blagojević N.P., Ristić M.M., Publ. SCS, Belgrade
(1994), pp.59-63.

55.  Stevanović MM, Pešikan DP
»Tensile Characteristics of Continuous Glass Fibres«,
Proc. 7th Eur.Conf.Comp.Mat., ECCM-7, London, Vol.2, (1996) pp.227-236.

56.  Stevanović MM, Pešikan DP.
»Mechanical Properties of Continuous Glass Fibre Nonvowen Fabric/Poliester Resin
Composites«,

      Proc. 8th Eur.Conf.Comp. Mat., ECCM-8, Naples, Vol.3 (1998) pp. 375-382.

57.  Ružić DD, Marković DS, Stevanović MM
»Effect of Edge Interlaminar Stresses on the Strength of Multidirectional Composites«
Proc. 28th Isr.Conf.Mechan.Eng., Ben Gurion Univ.,

Negreev Beersheva Israel, (2000) pp.405-408.




POGLAVLJA U KJIGAMA

 

58.  Стевановић М.
»
Влияние раствормых примесей на подвижнисть границы и

Пост зерен в соеченных окислах«,
в:»
Теория и технология спекания«

Ред.. Самсонов ГВ, Изд. Наукова думка, Киев (1974) стр. 148-155.

59.  Катанић-Поповић J, Стевановић М
»K
изучению прочности керамических матереиялов«,

в:»Теория и технология спекания«

Ред.. Самсонов ГВ, Изд. Наукова думка, Киев (1974) стр. 144-147,

60.  Bošković S., Stevanović M.
»Reaction Sintering of Co-NiO System«,

in: »Sintering and Catalysis«, Ed. Kuczinski G.S.,

Materials Science Research, Vol.10, Publ.Plenum Press (1975) pp. 455-463

 

61.  Stevanović M., Đuričić Lj., Polovina M

»Sintering of LixCoyNi1-x-yO Solid Solution«,

in: »Sintering New Developments«, Ed. Ristić M.M.,

Materials Science Monographs, Vol. 4, Publ.Elsevier, Amsterdam (1979) pp.216-222.

 

62.  Mihajlov A.N., Stevanović M.M., Jovanović S.D.
»Comparative Study of VLE Prediction by Various Modification

of RK Equation of State«, Chapter 20,

in: »Chemical Engineering Termodynamics«, Ed. Neweman S.A.,

Publ.Ann Arbor Sci., Collingwood (1983) pp. 233-241.

63.  Stevanović M.M., Briški D.G., Kostić M.C.
»Mechanical Properties and Fractographic Examination of Failure Created in Static
Mechanical Testing of CFRP«,

in: Composite Structure 3, Ed. Marshall I.I., Elsev.Appl.Sci. Publ., London (1985) pp.369-382.

 

monograFIJA

 

64.  Stevanović M,

»Vlaknima ojačani polimerni kompoziti«

Izd. Partenon, Beograd (2002) str.1-168


curriculum vitae

 

Momcilo m. stevanovic

Scientiffic Councelor – Full Professor

 

Professional rezume

Organisation: NSI Vinca, Material Science Laboratory

Phone/fax number: +381 11 2439 454

e-mail:stem@vin.bg.ac.yu         stem@sezampro.yu

 

Personal rezume

Born:1935, Skoplje, Macedonia

Marital Status: married, two children

 

Education

BASK: University of Belgrade, Faculty of Technology - 1959

Postgraduate Study: CEN Saclay, Paris, Radiation Damage of Sintered Oxides -1962.- 1964,

PhD Thesis, Faculty of Technology, Belgrade, Radiation Damage of Refractory Oxides - 1965

Post Doctoral Study: AB Atomenergy, Studswik, Sweden, In-Pile Behaviour of Nuclear Fuel –1966/67

 

previous fields of work

Material science-ceramic materials - radiation damage and mass

transport phenomena and processes in sintered oxides.

Chemical thermodynamics, heterogeneous equilibrium – nonstoishiometry and

vapor-liquid and vapor- solid equilibriums. Thermodynamics of vaporization.

Material science-mechanical behavior of fibre/plastic composites:

standard methods testing of fibres, matrix and composites-correlation of structure

and properties; no linear elastic behavior of carbon fibres and carbon fibres composites,

size effects of unidirectional composites and edge effects in laminates

 

present fields of interest

Material science-mechanical behavior of continuous fibres/plastic matrix composites:

Effects of ambient conditios (absorbed water, temperature, gamma irradiation).

Fracture mechanics of delamination (Mode I and II).

 

Professional experience

 

I. Resaerch

                        Leader of 8 one to two years subprojects and 4 three to five years projects, as scientific associate (1966-1975), as scientific senior associate (1976-1980) and as scientific counselor (1986-2000).

                        Leader of Serbia project New Carbon Materials and Composites Reinforced with Carbon Fibres -P 1977 financed by MNTD of Serbia  (2002-2004.)

 

 

 

II. Teaching

1.      Electronic Faculty of Nis University, Assistant Professor – 1969-1974

General Chemistry, undergraduate Study

Material Science, postgraduate Study

Supervised three MSc thesis

  1. Faculty of Technology, University of Novi Sad, Associate Professor1975-1980.

Chemical Thermodynamics, undergraduate Study

Supervised one PhD thesis

  1. Faculty of Technology and Metallurgy-Belgrade University, Full Professor - 1996-2000.

Heterogeneous Equilibrium, undergraduate Study,

Testing of Composite Materials, postgraduate Study

Supervised two MSc and one PhD thesis

4.      Center for the Multidisciplinary Study-Belgrade University, Full Professor - since 1982.

Composite Materials, postgraduate Study

Supervised three MSc thesis

 

III. Professional activity

 

Leadership and Management

 

            Institute Vinca

7.      Member of Institute Scientific Council - 1968-1971.

8.      Member of Institute Advisory Council - 1968-1971.

9.      Head of Ceramic Section of Material Science Laboratory - 1971-1973

10.  Director of Material Science Laboratory - 1974-1975.

11.  Deputy Director of Vinca Institute - 1986-1990.

12.  Vice President of Vinca Institute Management Council - 1992-1996.

            University

3.      President of Management Council of Institute for Petrol, Petrochemistry and Chemical Engineering of Novi Sad Faculty of Technology - 1976-1978.

4.      Member of Belgrade University Scientific Council - 1988-1990.

 

Membership in Scientific Societies

 

      National Societies:

  1. President of Ceramic Comity of Yugoslav Union of Chemical Society - 1975-1978
  2. Member of Chairmanship of Yougoslave Society for Carbon and Composite Materials - since 1995.
  3. Member of Chairmanship of Yugoslav Material Research Society - since 1999.

 

Interational Societies

  1. Member of Internationa Comunity for Compsites Engineering-ICCe, New Orleans, USA -since 1994.
  2. Member of European Composite Materials Society, London - since 1998.

 

 

Membership in advisory and editorial boards

 

  1. Member of Scientific Comity (Selection Papers Comity) of European Conferences Composite Testing and Standardization – CTS, reviewing extended abstracts of submitted papers, since 1992.
  2. Member of Editorial board of journal Technique – New Materials, Belgrade, since 1991.
  3. Member of Advisory Scientific Board of Yugoslav Material Research Society Conferences, reviewing papers submitted for publication in Materials Science Forum, since 1999

 

International Collaborations

 

Previous Collaborations

 

  1. VISA Projectt –CEN Saclay (France) – Vinča Institute, period 1962 – 1967. (field of no fissile oxides radiation damage)

(field of radiation damage in no fissile oxides)

  1. Institute of Material Science (Kiev, Ukraine) –Ceramics Section of Materials Department in Vinča Institute, period 1969 – 1975. (field of mass transport phenomena and mechanisms in sintered oxides)
  2. Prof.E.Fitzer , Institut fur Chemishe Technik, Universitat Karsruhe –Carbon Section of Materials Department in Vinča Institute, period 1980-1989.(field of composite materials esting).

Actual Collaborations of MM Stevanovic Research Teem

 

(Field of Mechanical Behaviour of Fibre Composites)

  1. with Prof. P.J.Hogg, Head of Materials Department, Queen Mary University (London) (unofficial collaboration since 1989)
  2. with Accademician J.G.Tarnopolski, Head of Laboratory of Composite Structures, Institute of Polymer Mechanics (Riga- Latvia) (unofficial collaboration since 1994)
  3. with Prof. C.Galiotis, Institute of Chemical Engineering and High Temperature Processes, Patras, Greece (official collaboration since 2004)

 

Honors

 

            Plaque of the Vinca Institute of Nuclear Sciences on the Occasion of Fiftieth Institute Anniversary

 

 

 

 

 

 

 

 

 

 

 

 

 

list of publicatiOns

 

in international journals

65.  Stevanović M., Petrović V.
»Contribution  to the Effect of Gas Pressure in the Pore on Boundary Migration and Grain
Growth in Sintered UO2«,

Pov.Met.Inter., 2 (1970) 49-56.

66.  Stevanović M.
»Influence of Pore Shape and Gas Pressure in Pore on Grain Boundary Migration«,
Phys.Sinter., 2 (1970) 49-56.

67.  Katanić-Popović J, Stevanović M
»Torsion Strength of Sintered UO2«,

 Epitoanyag, 24 (1972) 392-397.

68.  Stevanović M
»Volume Change of Pore Interacting with Grain Boundary«,

Phys.Sinter., 5 (1973) 25-30.

69.  Bošković S, Stevanović M
»Sintering of Co Dopped NiO«,

J.Mat.Sci., 5 (1975) 25-29.

 

70.  Stevanović M, Štiglić R
»ForceThermoelectrique et Pouvoir Thermoelectrique de NiO«,

Rev.Inter.Htes.Temp.Refract., 12 (1975) 93-96.

71.  Bošković S., Malčić S, Stevanović M
»Preparation, Properties and Reactions (CoyNi1-y)1-xO-Oxygen«,

J.Brit.Ceram.Soc., 75 (1976) 107-112.

72.  Živanović B, Stevanović M, Ranogajec J
»Analyse Thermodynamique de la Formation de Mulite Secondaire dans les Zones Vitreuse de
Feldspathe Potasique«

Industrie Ceramique, 766 (1982) 820-822.

73.  Stevanović M
»Thermodynamic Characteristics of Vaporization of Alkali Metals«,
Inter.J.Thermophys., 3 (1982) 157-164.

74.  Stevanović M, Đuričić L, Petrović V
»Influence of Oxygen on Grain Growth in Sintered NiO«,

Sci.Sinter., 14 (1982) 53-56.

75.  Stevanović MM
»Evaluation of P-V-T-Composition Characteristics of Carbon Saturated Vapor«,
Inter. J.Thermophys, 4 (1983) 127-138.

76.  Stevanović MM
»Thermodynamic Characterization of Vaporization of Fourth Group Elements«
Inter. J.Thermophys, 4 (1983) 353-362.

77.  Stevanović MM, Jovanović SC, Mihajlov AN
»Contribution a l Etude de la Thermodynamique de Vaporisation de Carbon«,
High Temp. High Press., 16 (1984) 221-228.

 

78.  Stevanović MM
»Evaluation of Temperature Dependence of Vapor Pressure for Silicon
ang Germanium«,

Thermochimica Acta, 77 (1984) 167-176.

79.  Stevanović M, Nešić O
»Characteristiques en Compression et Defaillance Due a la Compresion des Composites
Carbon/Epoxyde«,

      Annales des Composites, 7 (1987) 123-139

80.  Stecenko TB, Stevanović MM
»Variation of Elastic Moduli with Strain in Carbon/Epoxy Laminates,«,

J.Compos.Mat., 24 (1990) 1152-1158.

 

81.  Stevanović MM, Stecenko TB
»Behaviour of Carbon/Plastic Composites Under Uniaxial Load«
Mechan.Comp.Mat., 5 (1991) 924-927.

 

82.  Stevanović MM, Stecenko TB
»Mechanical Behaviour of Carbon and Glass Hybrid Fibre Reinforced Poliester Composites«,
J.Mat.Sci., 27 (1992) 941-946.

83.  Stevanović MM, Stecenko TB
»Tensile and Flexural Macromechanical Characteristics of Glass/Polyester Composites«,
J.Serb.Chem.Soc., 57 (1992) 451-459.

84.  Stevanović MM, Stecenko TB
»The Strain Dependence of the Flexural Modulus in Unidirectional
Carbon/Epoxy Composites«, J.Serb.Chem.Soc., 57 (1992) 785-793.

85.  Stevanović MM
»Analysis of the Effects Influencing the Value of Apparent Flexural
Modulus of Carbon/Epoxy Laminate«, Review paper,

Sci.Sinter., 26 (1994) 195-203.

86.  Stevanović MM
»Simultaneous Determination of Axial and Shear Elastic Moduli of
Unidirectional Carbon/Epoxy Composites«,

 J.Serb.Chem.Soc., 59 (1994) 511-518.

87.  Stevanović MM
»Non-Linear Elastic Behavior of Carbon, Fiber Based Composites«,
J.Serb.Chem.Soc., 60 (1995) 945-950.

88.  Stevanović MM
»Interlaminar Stresses in Flexured Laminate Systems«
Sci.Sinter., 28 (1996) 43-45.

89.  Stevanović MM
»Mechanical Behaviour of Carbon/Epoxy Composites«, Review Paper,
Mat.Sci.Forum, 214 (1996) 231-238.

 

90.  Stevanović MM
»Strength of  Continuous Fibres Reinforced Composites«
Mat.Sci.Forum, 282-283 (1998) 251-257.

91.  Stevanović MM, Marković DS
»Effect of Edge Induced Interlaminar Stresses on Fibre Laminate Strength«,
Sci.Sinter., 31 (1), (1999)  51-59.

 

92.  Stevanović MM, Pešikan DR,
»Tensile Characteristics of Carbon Fibres«
Mat.Sci.Forum, 352 (2000) 183-188.

 

93.  Stecenko TB, Stevanović MM
»The Effect of Fibre Waviness on Compression Failure of Cross-Ply
Carbon/Epoxy Laminates«
Mat.Sci.Forum, 352 (2000) 189-194.

 

94.  Stevanović MM, Elhisnavi AA, Pešikan DR,

»Size Effect inCarbon Fiber/Epoxy Resin Composite«

Mat.Sci.Forum, 413 (2003) 207-212.

 

95.  Stevanovic MM, Pesikan-Sekulić DR

»Macromechanical Characteristics Deduced from Tree Point Flexure

Tests of Unidirectional Carbon/Epoxy Composites«

Mechan.Comp.Mater, 29(6)  (2003) (in press)

 

96.  Stevanović MM, Marković DS, Pešikan DR,

»Effects of Stacking Sequence on Strength of Cross-Ply

and Quasi-Isotropic Carbon/Epoxy Laminates«

Mat.Sci.Forum, (Accepted for publication)

 

 

in proceedings of interantional conferences

97.  Stevanović M., Elson J.
»Effect of Fast Neutron Irradiation in Sintered Alumina and Magnesia«,
Proc.Brit.Ceram.Soc., 7 (1967) 423-437.

98.  Roux A., Richard M., Eyraud L., Stevanović M., Elson J.
»Determination Direct des Entalphies de Reaction in Phase Solide par une
Methode de Plongee«,

      Inter.Coloque Eff.Irrad., Saclay, Publ CEA, Paris (1967) pp.1-27.

99.  Petrović V, Sigulinski F, Stevanović M
»Grossissement des Grains de l  UO2 de Porosite Differente«,
Proc. 2nd Eur.Symp.Pow.Met., Vol.2, Stuttgart (1968) pp.83.1-25.

100.          Petrović V, Stevanović M
»Phenomenom of Spiral Concentratic Growth in Sintered Materials«,
Proc. 4th Inter.Pow.Met.Conf., Vol.1, Dresden (1969) pp.14. 1-16.

101.          Petrović V, Trbojević L, Stevanović M
»Pore-Grain Boundary Interaction in Sintered UO2,

Proc. 3rd Inter:Conf.Pow.Met., Vol.3, Karlove Vary (1970) pp.325-337.

102.          Kostić E, Stevanović M, Ristić M
»Sinntering in Oxide Materials« (in russian),

Pow.Met.Sum.Scool., Kiev (1970) pp. 1-23.

103.          Anastasijević P,... Stevanović M
»Research in Fuel Element Technology in Yugoslavia«,

Proc. 4th Inter.Conf. Peac.Uses Atom.Energ., Generva 1971,

Publ. IAEA, Vienna 4 (1972) 491-504.

104.          Štiglić R., Trbojević Lj, Stevanović M
»Effect of Li2O Addition on Density and Electrical Conductivity of NiO«,

Proc. First.Conf.Comp.Consol.Partic.Mat., Publ.Pow.Adw.Centre,

London, (1973) pp.75-79.

105.          Bošković S, Stevanović M
»Sinatering of CoO doped NiO«,

Proc.Conf.Ceram.Electr., Libice (1974) 22. pp1-11.

106.          Bošković S, Stevanović M
»Sintering of (CoyNi1-y)1-xO Solid Solution«,

Proc.4th Eur.Symp.Pow.Met., Vol.2, Grenoble (1975) pp.101-109.

107.          Stevanović M, Bošković S
»Investigations of Oxide  Semiconductors«, Review Paper,

Proc. 2nd Yug.Germ.Meet.Mat. Sci. Develop., Bled (1976) pp.114-118.

108.          Bošković S, Stevanović M
»Elektroprovodnost v Izučeni Reakciy i Fazovyh Perehodov do 1000oC v Sisteme
Li2O-CoO-NiO«,

Proc.12th Conf.Silic.Sci.Industr. SILICONF, Budapest (1977) pp.1095-1105.

109.          Stevanović M, Mihajlov-Deduković A., Jovanović S
»Applicability of Different Mixing Rules for Cubic Equation of RK Type in
Description of Binary Sistems VLE«,

Proc. 2nd Yug.Ital.Austr.Chem.Eng.Conf., Bled (1980) pp.1-10.

110.          Stevanović MM
»Mechanical and Failure Behaviour of CFRP Composites«,

Proc.First Germ.Yug.Semin.Carb.Mat., Vinča, Publ.KFA (1985) pp.77-93.

111.          Stevanović MM, Briški DG, Kostić MC
»Shear in Carbon/Epoxy Resin Composites«,

Proc. 4th Inter.Carbon Conf., Carbon 86, Baden-Baden (1986) pp.731-733.

112.          Stevanović M, Kostić M, Stecenko T, Briški D
»Impact Behaviour of CFRP of Different Stacking Geometry«
Proc. 2nd Inter.Conf. Composites Evaluation, Ed. Herriot J.,

Publ.Butterworth, Borough Green (1987) pp.78-83.

113.          Stevanović MM, Stecenko TB, Kostić MC
»Effect of Impactor Shape on Residual Tensile Strength and

Tensile Failure of Carbon/Epoxy Laminates«,

Proc. 5th Int.Conf.Comp.Struct.-Paisly, Elsev.

Appl.Sci.Publ., London (1989) pp.323-331.

114.          Stevanović M, Stecenko T
»Influence of Edge Interlaminar Stresses on Interlaminar Shear Strength of Multidirectional
Carbon Epoxy Composites«,

Proc. Inter.Conf. »Interfacial Phenbomena in Composite Materials«, Ed. I.Verpoest, Butteerworth, Oxford (1991) pp.297-299.

115.          Stevanović M, Stecenko T.
»Contribution to the Proper Interpretation of Data on Carbon/Epoxy Composites in Trhee
Point Flexure test«,

 Proc. Eur.Conf.ECCM-CTS, Amsterdam (1992) pp.197-302.

116.          Stevanović M
»Non-linear Elastic Behavior of Carbon Fiber Based Composites«,

Proc.Inter.Conf. Comp.Eng., New Orleans (1994) pp.1081-1083.

117.          Stevanović MM, Spasojević AD, Marković DS
»Determination of the Shear Properties of Carbon/Epoxy Composites by Different Methods«,
Proc.2nd Eur.Conf. ECCM-CTS (1994), pp.367-376.

118.          Stevanović MM
»State of the Art of Advanced Fibre Reinforced Composites«, Invited Paper,
Proc. SCS.Ceram.Glass Symp. Inter.Particip. - »Advanced Ceramics and Glass-
State and Perspectives
«, Ed. Blagojević N.P., Ristić M.M., Publ. SCS, Belgrade
(1994), pp.59-63.

119.          Stevanović MM, Pešikan DP
»Tensile Characteristics of Continuous Glass Fibres«,
Proc. 7th Eur.Conf.Comp.Mat., ECCM-7, London, Vol.2, (1996) pp.227-236.

120.          Stevanović MM, Pešikan DP.
»Mechanical Properties of Continuous Glass Fibre Nonvowen Fabric/Poliester Resin
Composites«,

      Proc. 8th Eur.Conf.Comp. Mat., ECCM-8, Naples, Vol.3 (1998) pp. 375-382.

121.          Ružić DD, Marković DS, Stevanović MM
»Effect of Edge Interlaminar Stresses on the Strength of Multidirectional Composites«
Proc. 28th Isr.Conf.Mechan.Eng., Ben Gurion Univ.,

Negreev Beersheva Israel, (2000) pp.405-408.




chapteres in books

 

122.          Stevanović M.
»Effect of Solute IMputities on Grain Boundary Mobility in Sintered Oxides «, in:
in:»Theory and Technology of Sintering« (in russian),

Ed. Samsonov GV, Publ. Naukova Dumka, Kiev (1974) pp. 148-155.

123.          Katanić-Popović J, Stevanović M
»Study of Cermic Materials Strength«,

      in:»Theory and Technology of Sintering« (in russian),

Ed. Samsonov GV, Publ. Naukova Dumka, Kiev (1974) pp. 144-147,

124.          Bošković S., Stevanović M.
»Reaction Sintering of Co-NiO System«,

in: »Sintering and Catalysis«, Ed. Kuczinski G.S.,

Materials Science Research, Vol.10, Publ.Plenum Press (1975) pp. 455-463

 

125.          Stevanović M., Đuričić Lj., Polovina M

»Sintering of LixCoyNi1-x-yO Solid Solution«,

in: »Sintering New Developments«, Ed. Ristić M.M.,

Materials Science Monographs, Vol. 4, Publ.Elsevier, Amsterdam (1979) pp.216-222.

 

126.          Mihajlov A.N., Stevanović M.M., Jovanović S.D.
»Comparative Study of VLE Prediction by Various Modification

of RK Equation of State«, Chapter 20,

in: »Chemical Engineering Termodynamics«, Ed. Neweman S.A.,

Publ.Ann Arbor Sci., Collingwood (1983) pp. 233-241.

127.          Stevanović M.M., Briški D.G., Kostić M.C.
»Mechanical Properties and Fractographic Examination of Failure Created in Static
Mechanical Testing of CFRP«,

in: Composite Structure 3, Ed. Marshall II. Publ.Elsev.Appl.Sci., London (1985) pp.369-382.

 

monographs

 

128.          Stevanović M,

»Fibres Reinforced Polymer Composites« (in serbian)

Publ. Partenon, Belgrade (2002) pp.1-168